-
von Karman Institute Lecture Series / RTO: Fluid Dynamics associated to Launchers developments
Conference, Waterloosesteenweg 72, 1640 Sint-Genesius-Rode, Belgium, April 2, 2012
The course will provide an overview of the key fluid dynamic
issues driving the design of launchers and will elaborate in
detail on topics such as: propulsion systems with emphasis
on start up and shut down, propellant behavior, combustion
instability, sloshing phenomenon, phase change events,
cavitation, cryogenic and two-phase flows, pressure
oscillations and slag accumulation in solid rocket boosters,
nozzle optimization and flow detachment.
-
OpenFOAM: A Two-Day Advanced course - Melbourne
Course, Melbourne, Australia, March 29, 2012
This two-day course is delivered by Prof. Hrvoje Jasak, one
of the main developers of the OpenFOAM library.
-
Workshop: Computational Fluid Dynamics (CFD) for Fired Equipment in Oil & Gas
Workshop, Renaissance Houston Greenway Plaza Hotel, 6 Greenway Plaza East, Houston, United States, March 29, 2012
CD-adapco is holding a one-day educational seminar for you.
Computer Aided Engineering methods are routinely use to
analyze fired equipment in the Oil and Gas industry. The
seminar will provide background on the benefits of
engineering simulation to gain deeper insight in to the
performance of fired equipment such as flares, fired
heaters, boilers, thermal oxidizers, and duct-fired heat
recovery systems.
-
Training on Introduction to AutoBlade
Online Event, March 28, 2012
Join NUMECA for a FREE webinar on March 28!
-
Workshop: A Guide to Modeling Complex Geometries and Advanced Physics Problems
Workshop, Marriott Cleveland East 26300 Harvard Road, Warrensville Heights, United States, March 27, 2012
This workshop provides insight into a unique modeling
approach to building complex 3D physics based models fast
and accurately.
Attendees will work directly with CD-adapco CFD specialists
to realize the benefits of engineering simulation software.
Using STAR-CCM+ attendees will drive the software to learn
new methods for producing better designs, reducing cost and,
improving development times.
-
OpenFOAM: A Two-Day Introductory course - Melbourne
Course, Melbourne, Australia, March 26, 2012
This two-day course is delivered by Prof. Hrvoje Jasak and
Dr Darrin Stephens.
-
ANSYS FLUENT Turbulence Workshop
Workshop, Gothenburg, Sweden, March 20, 2012
ANSYS FLUENT Turbulence Workshop
-
OpenFOAM: A Two-Day Introductory course - Perth
Course, Perth, Australia, March 20, 2012
This two-day course is delivered by Prof. Hrvoje Jasak and
Dr Darrin Stephens.
-
STAR Global Conference 2012
Conference, Grand Hotel Huis ter Duin, Noordwijk aan Zee, Netherlands, March 19, 2012
The inaugural STAR Global Conference will be held on March
20 and 21, 2012 at the Grand Hotel Huis ter Duin in the
Netherlands, an exclusive beach front hotel located just 20
minutes from Schiphol Airport.
-
Training on Advanced Mesh Generation in IGG
Online Event, March 15, 2012
Join NUMECA for a FREE webinar on March 15!
-
modeFRONTIER Workshop
Workshop, International Digital Lab, University of Warwick, Coventry, United Kingdom, March 14, 2012
Introductory Workshop to the Multidisciplinary Design
Optimisation and Process Integration Software modeFRONTIER.
-
Training on Introduction to AutoGrid5
Online Event, March 13, 2012
Join NUMECA for a FREE webinar on March 13!
-
Engineering Workshop: Modeling complex geometries and advanced physics problems
Workshop, Hilton Montreal/Laval, 2225, autoroute des Laurentides, Laval, Canada, March 13, 2012
Please join us on Tuesday, March 13th from 9:00am-4:00pm at
the Hilton Montreal/Laval, for a one day workshop where you
can learn how to create simulations utilizing complex
geometries and advanced physics.
-
von Karman institute Lecture Series: Aircraft Noise
Conference, Waterloosesteenweg 72, 1640 Sint-Genesius-Rode, Belgium, March 12, 2012
With a 4 to 5% annual growth of air traffic in the last
years, the reduction of aircraft noise becomes imperative
for the social acceptance of air transport growth. This
Lecture Series reviews the different sources of aircraft
noise, how noise source and propagation can be modelled,
reviews solutions to mitigate noise emissions and shed light
on the way humans perceive noise.
-
Webinar: Speeding up my natural convection analyses (US/Europe) Part 1
Online Event, March 8, 2012
Best practices for simulating thin air gaps in electronic
systems.
While many electronic devices have power densities that
require forced air flow, a significant number of systems can
still utilize solely natural (passive) convective cooling.
The reliability and quietness of passively cooled systems is
especially attractive for consumer devices, so investigating
these cooling options is a valuable portion of the design
process.
-
Introduction to FORTE
Online Event, March 7, 2012
During this event the presenter will demonstrate how design
engineers
can use the new FORTE CFD Package to get quick and accurate
predictions of engine behavior and emissions across the
broadest
range of fuels with scientifically proven fuel models. Cut
your
Time-to-Solution while designing cleaner burning engines
using the
latest combustion science.
-
Symposium of von Karman Institute Phd research 2012 - FREE REGISTRATION
Conference, Waterloosesteenweg 72, Sint-Genesius-Rode, Belgium, March 5, 2012
A complete review of the research carried out by the large
VKI Phd community is presented. Talks are organized in
coherent topics that may cover fields such as plasma flows,
turbine flows, multiphase
flows, engine and compression flows, aero acoustical flows,
residual distribution and flows, transitional flows, heat
transfer flows, hazards in flows.
-
Computational Simulation & Analysis for Scientists & Engineers
Workshop, Gandhigram Rural Institute, Gandhigram , Dindigul, India, March 1, 2012
The need of today for
university / institutes is to train researchers and
students in the areas of computational engineering and
science for the need of the industry to work in the above
said area
-
FloEFD for NX - Concurrent CFD for Siemens NX Design Engineers and Analysts
Online Event, February 29, 2012
Register Now
Feb 29, 2012
Online
2:00 PM - 3:00 PM US/Eastern
-
Formula 1 Brake Duct Inlet Optimization Under Uncertainty
Online Event, February 29, 2012
WebForum: Learn how Stanford University researchers find the
optimum shape under uncertainty of a Formula 1 brake duct
inlet using mesh morphing.
-
Webinar Tutorial: Analysis of Exploratory CFD Data using Tecplot Chorus
Online Event, February 28, 2012
Join us Tuesday, February 28 for a free online tutorial,
featuring practical applications for easily managing and
analyzing large datasets.
-
Workshop on Computational Fluid Dynamics Applications in Power Plant and Industries
Workshop, Central Power Research Institute, PB No.8066, , Bangalore-80, India, February 27, 2012
This workshop covers invited lectures on basic understanding
of meshing and CFD analysis followed by the lectures on the
recent advances in CFD and the case studies in the power
plant and industries. The workshop will enable the
participants to become knowledgeable about the best
practices in handling CFD and better way to solve their own
problem in the industry.
-
Introduction to CHEMKIN-PRO
Online Event, February 22, 2012
The presenter will demonstrate how design engineers
can use CHEMKIN-PRO to solve complex chemical design
problems. This web
seminar reviews the fundamentals behind the CHEMKIN-PRO
software, and
focuses on ways to apply CHEMKIN-PRO software in optimizing
and
improving understanding of chemical process behavior. We
will
cover CHEMKIN-PRO gas-phase and surface formalisms for
developing and
describing chemical mechanisms, as well as example
applications to
industry-relevant problems.
-
FloTHERM User Meeting - Thermal Analysis of IC Devices
Online Event, February 22, 2012
Register Now
Feb 22, 2012
Fremont, CA
6:00 PM - 7:00 PM US/Pacific
Please join us for a our monthly FloTHERM user meeting
series. This month's topic, thermal analysis of IC devices.
-
Training on Introduction to FINEMarine
Online Event, February 20, 2012
Join NUMECA for a FREE webinar on February 20!
-
Training on Introduction to VNoise
Online Event, February 15, 2012
Join NUMECA for a FREE webinar on February 15!
-
CFD: A Comprehensive Introduction
Course, School of Engineering, Cranfield, United Kingdom, February 13, 2012
This course has a strong emphasis on the application of CFD
with substantial hands-on experience using a number of
meshing packages (POINTWISE and ICEM CFD), a leading
commercial CFD package ANSYS FLUENT and the post-processing
and data analysis package TECPLOT.
-
OpenFOAM user & advanced training in Prague
Course, Lisabonska 2394/4 , Prague, Czech Republic, February 13, 2012
OpenFOAM user & advanced training organised by CFD
support, s.r.o. will be held in Prague (Czech Republic) in
February 2012. http://www.cfdsupport.eu/training.php
-
modeFRONTIER Workshop
Workshop, International Digital Lab, University of Warwick, Coventry, United Kingdom, February 8, 2012
Introductory Workshop to the Multidisciplinary Design
Optimisation and Process Integration Software modeFRONTIER.
-
Engineering Workshop: Doing more with less: time, cost, software.
Workshop, Hilton Columbus Easton, Columbus, United States, February 8, 2012
Please join us on Wednesday, February 8th from 9:00am-4:00pm
at the Hilton Columbus Easton, for a one day workshop where
you can learn how to create simulations utilizing complex
geometries and advanced physics.
-
Engineering Workshop: Modeling complex geometries and advanced physics problems
Workshop, 3900 Chagrin Drive, Columbus, United States, February 8, 2012
Please join us on Wednesday, February 8th from 9:00am-4:00pm
at the Hilton Columbus Easton, for a one day workshop where
you can learn how to create simulations utilizing complex
geometries and advanced physics.
-
Radial Compressor Design and optimization
Conference, Waterloosesteenweg 72, Sint-Genesius-Rode, Belgium, February 6, 2012
This short course is the regular course on radial
compressors thought at VKI to the turbomachinery students
specializing in compressors in the context of the Research
Master in Fluid Dynamics. It provides an overview of the
present knowledge and flow models and intends to provide a
good background for the people interested in the design of
radial compressors.
-
Large Eddy Simulations and Related Techniques: Theory and Applications
Conference, Waterloosesteenweg 72, Sint-Genesius-Rode, Belgium, February 6, 2012
The purpose of this Lecture Series is to offer a full overview
of the present development and the potential of the Large
Eddy Simulation (LES) of turbulent flows. The first part of
the course will introduce and discuss fundamental
principles, present state-of-the-art applications and
possible developments of LES and Detached Eddy Simulation
(DES) which represents the most promising technique to
extend the usefulness of LES for high Reynolds-number flows.
-
Webinaire: La Simulation numerique pour le design des machines tournantes
Online Event, February 1, 2012
http://www.cd-adapco.com/events/webinars/70140000000MzeU
-
Training on Introduction to HEXPRESS
Online Event, January 25, 2012
Join NUMECA for a FREE webinar on January 25!
-
Smoothed Particle Hydrodynamics (SPH), 2-day course, January 2013, University of Manchester, UK
Course, University of Manchester, Manchester, United Kingdom, January 24, 2012
The University of Manchester will be running a 2-day short
course on Smoothed Particle Hydrodynamics (SPH) suitable for
engineers and scientists in 24-25 January 2013:
SPH is a meshless computational method for potentially
highly violent fluid flows where there is very large
deformation with arbitrarily complex moving boundaries
including coastal and shallow water hydrodynamics, and other
flows such as marine, structures, fluid/structure
interaction, sloshing, flooding, debris, slurry, etc.
-
Training on Introduction to IGG v8.9-3
Online Event, January 18, 2012
Join NUMECA for a FREE webinar on January 18
-
International Computational Modelling Validation Conference
Conference, Australian Technology Park, (http://www.atp.com.au/), Sydney, Australia, January 14, 2012
Who Can Join?
Academics, Researchers, Industrial Engineers, Scientists,
Students, CFD/FEA/Process Modelling/Reservoir Simulation
users, Computational modeler, managers.
Please fill up the form to attend the computational
modelling validation conference session in ATP (Australian
Technology Park), Australia, 13-14th January 2012. For
Academic $1200 Aus, Industry $1800 Aus, Commercial Software
$3000 Aus.
http://www.doncomputing.com/registration.html
-
International Conference on Numerical Methods in Multiphase Flows
Conference, Penn State University, State College, United States, January 1, 2012
Considering the vast importance of multiphase flows in
energy systems, biomedicine, defense systems, manufacturing,
and the environment, and the growing importance of CFD in
multiphase flows, the executive co-organizers are hosting a
dedicated conference on the topic of numerical methods in
multiphase flows, to bring together the international
community in a focused technical exchange environment.
-
OpenFOAM: A Two-Day Advanced course
Course, Gothenburg, Sweden, January 1, 2012
This two-day course is delivered by Prof. Hrvoje Jasak, one
of the main developers of OpenFOAM.
-
von Karman Institute Lecture Series: Introduction to Optimization and Multidisciplinary Design in AR & TU
Conference, Waterloosesteenweg 72, 1640 Sint-Genesius-Rode, Belgium, January 1, 2012
This course intends to provide the basic concepts and tools
behind this technology, both in single discipline and
multidisciplinary context. Subjects which will be treated in
detail include: gradient based and steepest descent methods,
adjoint methods, one shot or goal oriented methods,
evolutionary/differential evolution algorithms on parallel
environments, game strategies, parameterization, surrogate
and reduced-order
modeling, multifidelity modeling approaches, robust design.
-
Workshop: Complex 3D CAD geometry for the successful CFD/FEA/CAE simulation
Workshop, The Trinity Centre, 24 Cambridge Science Park, Milton Road, Cambridge, United Kingdom, January 1, 2012
This workshop provides an excellent opportunity for
attendees to see first hand how flow and thermal simulation
can facilitate innovation, and reduce development time and
costs. There is no charge to attend but registration is
required.
-
18th IEEE International Conference on High Performance Computing (HiPC)
Conference, Bangalore, India, December 18, 2011
The 18th annual IEEE International Conference on High
Performance
Computing (HiPC 2011) will be held in Bengaluru
(Bangalore), India,
during December 18-21, 2011. It will serve as a forum for
researchers
from around the world to present their current research
efforts and
findings, and will act as a venue for stimulating
discussions and for
highlighting high performance computing (HPC) activities in
Asia.
-
2011 ANSA & mETA Indian Open Meeting - Pune
Conference, Taj - Blue Diamond, Pune, Pune, India, December 16, 2011
This event aims to introduce the latest developments in ANSA
and mETA Pre- and Post-Processing suite and to showcase its
application in various CAE disciplines.
-
modeFRONTIER Introductory Workshop
Workshop, International Digital Lab at Warwick University, Coventry, United Kingdom, December 14, 2011
Within increasingly competitive industries, there is a
growing demand for engineers to produce better and more
efficient designs in less time. This workshop offers the
ideal opportunity for you to evaluate modeFRONTIER, the
leading multi-objective optimisation software, in a hands-
on training day.
-
2011 ANSA & mETA Indian Open Meeting - Bangalore
Conference, The Chancery Pavilion, Bangalore, Bangalore, India, December 14, 2011
This event aims to introduce the latest developments in ANSA
and mETA Pre- and Post-Processing suite and to showcase its
application in various CAE disciplines.
-
Training on Introduction to AutoGrid5 v8.9-2
Online Event, December 13, 2011
FREE Webinar on AutoGrid5 v8.9-2, December 13
-
Webinar: Internal Combustion Design Optimizarion
Online Event, December 8, 2011
Webinar demonstrating the benefits of coupling CONVERGE,
Sculptor and modeFRONTIER using case studies from two
companies at the forefront of internal combustion design
showing a revolutionary new design optimization process.
-
Training on Introduction to HEXPRESS/Hybrid v2.11-2
Online Event, December 7, 2011
Join NUMECA International for a FREE Webinar on December 7
-
2nd. OpenFOAM(R) Training in Brazil
Course, LCFT/ITA, Sao Jose dos Campos, Brazil, December 5, 2011
Basic and Advanced OpenFOAM(R) training in Sao Jose dos
Campos, Brazil, from 5 to 8 of December, 2011.
-
Training on Introduction to FINE/Marine v2.3-2
Online Event, December 2, 2011
Join us on December 2 for a free webinar on Introduction to
FINE/Marine v2.3-2
-
European ANSYS Polyflow Conference
Conference, Sheraton Brussels International Airport Hotel, Zaventem, near Brussels, Belgium, November 28, 2011
ANSYS is very happy to invite you to the 2011 European ANSYS
POLYFLOW Conference. At this one-day free conference you
will learn how recent developments boost virtual prototyping
for polymer processing and glass forming.
-
The 4th International Workshop of Energy Conversion (IWEC)
Conference, Japan, November 28, 2011
We cordially invite you to join us in the 4th International
Workshop of Energy Conversion (IWEC). This year, the IWEC
will be held in Kyoto, Japan, November 28-30, 2011. The
organizer institute of IWEC2011 is Energy Conversion Reserch
Center, Doshisha University. The venue of IWEC2011 is in
Energy Conversion Reserch Center, Kyo-tanabe Campus,
Doshisha University, Kyoto, Japan. The workshop processing
will be published at the workshop.
-
ANSYS Simulaton Open Day - Aberdeen
Workshop, DoubleTree by Hilton, Aberdeen, United Kingdom, November 25, 2011
ANSYS is offering a free simulation open day for those
interested in learning how to work with ANSYS engineering
software. This is an opportunity for you to meet our
Computer Aided Engineering (CAE) Simulation experts and
discuss your potential applications. The day is aimed at
providing engineers practical CAE training to help
accelerate productivity, launch products on time and
support better engineering decisions.
experts and existing users.
-
Webinar: Vehicle Simulation for Aerodynamics and Underhood Analysis
Online Event, November 24, 2011
Manufacturers from the automotive, trucking, heavy
equipment, and even the defense industry all are
increasingly relying on vehicle simulation to not only
improve product performance, but also to reduce
time-to-market and prototyping costs.
-
Webinar: Vehicle Simulation for Aerodynamics and Underhood Analysis
Online Event, November 24, 2011
Manufacturers from the automotive, trucking, heavy
equipment, and even the defense industry all are
increasingly relying on vehicle simulation to not only
improve product performance, but also to reduce
time-to-market and prototyping costs.
-
Webinaire : La Simulation Multiphysique pour le Genie des Procedes
Online Event, November 23, 2011
http://www.cd-adapco.com/events/webinars/70140000000N0Jw
-
OpenFOAM: a two-day advanced course
Course, IBM European Storage Competence Centre, Mainz, Germany, November 23, 2011
This two-day course is delivered by Henrik Rusche, partner
at Wikki Ltd and collaborator of Prof. Hrvoje Jasak.
-
OpenFOAM: a two-day introductory course
Course, IBM European Storage Competence Centre, Mainz, Germany, November 23, 2011
This two-day course is delivered by Prof. H. Jasak, one of
the main developers of OpenFOAM.
-
Webinaire : La Simulation Multiphysique pour le Genie des Procedes
Conference, France, November 23, 2011
Dans le domaine de la chimie des procédés, la simulation
multi-physique est utilisée pour comparer le fonctionnement
d’équipements différents dans le but de les optimiser ou
encore pour vérifier et valider les systèmes existant. La
simulation permet aux ingénieurs d'explorer différents
concepts au sein d'un environnement virtuel, sans devoir
élaborer de prototypes.
-
1st Australian OpenFOAM Users Group meeting
User Conference, Building 60, Theatre E4, Monash University, Clayton Campus, Melbourne, Australia, November 23, 2011
The 1st Australian OpenFOAM Users Group meeting will be
held at the Monash University, Clayton campus on Wednesday,
November 23, 2011. Attendance is FREE but registration is
required for catering purposes. Please register online at
www.wikki.com.au.
-
Experimental Fluid Mechanics 20011
Conference, Valdstein Chateau, Valdstejnovo namesti 1 , Jicin, Czech Republic, November 22, 2011
The conference will focus on obtaining an overview of
projects under investigation, and experimental methods used
in the field of fluid mechanics and thermodynamics.
-
modeFRONTIER for InfoWorks CS Introductory Workshop
Workshop, International Digital Lab, Warwick University, Coventry, United Kingdom, November 22, 2011
An interactive workshop to the modeFRONTIER interface
developed to communicate with InfoWorks CS.
-
Symposium on Applied Aerodynamics and Design of Aerospace Vehicles (SAROD-2011)
Conference, Eagleton Resorts, BANGALORE, India, November 16, 2011
The symposium focuses on recent developments in the area of
aerospace vehicle design with emphasis on experimental
aerodynamics
-
Introductory Programming Training based on OpenFOAM technology in Maastricht
Course, Maastricht, Netherlands, November 16, 2011
This training is an introduction to the OpenFOAM software
structure. Trainees will be able to modify and create
solvers or utilities and change some basic library
components, such as turbulence models or boundary
conditions. In general, the Programming Training is designed
to enable the effective use of OpenFOAM technology in
every-day engineering problems.
-
ERCOFTAC: Design Optimisation - Methods and Applications
Course, EADS - CASSIDIAN, Manching, Germany, November 15, 2011
The two day course will provide:
a)An overview of modern design optimisation methods
b)Comprehensive discussions on the presented methods
including their pros and cons, assisting industrial
engineers to select the best-suited approach for solving
their particular problems.
3)Based on the latter topic, successfully treated examples
in the areas of aeronautics, the automotive, and the turbo-
machinery industry will be presented and thoroughly
discussed.
-
NUMECA International's 7th User Meeting
User Conference, Belgium, November 15, 2011
NUMECA International's 7th User Meeting will be held in
Brussels on the
15th and 16th of November 2011 and will be followed, on 17th
and 18th November, by complementary advanced training
workshops at NUMECA Headquarters.
-
South Scotland Engineering Simulation Seminar
Seminar, James Watt Conference Centre, East Kilbride, United Kingdom, November 10, 2011
ANSYS are holding a seminar presenting engineering
simulation software solutions -focusing on ANSYS 13
simulation tools that address the challenges of structural
mechanics and fluid dynamics. Be one of the first people
in the UK to see this release demonstrated, illustrating
the use of ANSYS technology and showing the wide ranging
and totally integrated nature of the ANSYS portfolio.
-
ANSYS UK User Conference 2011
Conference, Heritage Motor Centre, Gaydon , United Kingdom, November 9, 2011
This complimentary, interactive gathering offers
opportunities for exchanging ideas and improving
engineering simulation skills.
-
Simulating Turbulent Flows
Seminar, Radisson Blu Astrid Hotel, Koningin Astridplein 7, Antwerpen, Belgium, November 8, 2011
Free Info Day on Simulating Turbulent Flows which aims to
show how CFD simulation can meet your growing demands for
accurately and efficiently capturing the effects of
turbulence. The seminar will cover the most popular SRS
models such as Scale-adaptive simulation (SAS), Detached
eddy simulation (DES), Large eddy simulation (LES) and wall-
modeled LES (WMLES), as well as Zonal and embedded LES
models.
-
Open Source CFD International Conference 2011
Conference, Dolce Hotel, Paris-Chantilly, France, November 3, 2011
This year's event, taking place in Chantilly, France from
3rd - 4th November 2011, will build upon the considerable
interest and success of those who are using, programming and
deploying open source CFD solutions both in industry and
academia.
-
modeFRONTIER Introductory Workshop
Workshop, Internaitonal Digital Lab, Warwick University, Coventry, United Kingdom, November 1, 2011
Within increasingly competitive industries, there is a
growing demand for engineers to produce better and more
efficient designs in less time.
This workshop offers the ideal opportunity for you to
evaluate modeFRONTIER, the leading multi-objective
optimisation software, in a hands-on training day.
-
2011 ANSYS CONFERENCE & ESSS USERS MEETING
User Conference, Argentina, October 31, 2011
Engineers, designers, analysts, researchers and executives
will find opportunities for exchanging ideas about Computer
Aided Engineering (CAE) and improving their engineering
simulation skills through workshops, training courses,
technical sessions and plenary sessions.
-
2011 Netherlands ANSYS Regional Conference
User Conference, High Tech Campus Eindhoven , The Strip High Tech Campus 1, EINDHOVEN, Netherlands, October 28, 2011
Whether you are a designer, engineer, analyst, manager or
executive, your regional conference can help you face this
next generation of engineering challenges, leading to
increased innovation, efficiency and product success.
-
FLOW-3D Users Conference in Japan
User Conference, Tokyo International Forum, Tokyo, Japan, October 28, 2011
The 2011 FLOW-3D Users Conference in Japan will be held
October 28, 2011 at the Tokyo International Forum in Tokyo,
Japan. For more information, contact Flow Science Japan.
-
2011 Belgium ANSYS Regional Conference
User Conference, Dolce La Hulpe Hotel, 135 Chausee de Bruxelles, 1310 La Hulpe, LA HULPE, near Brussels, Belgium, October 25, 2011
Whether you are a designer, engineer, analyst, manager or
executive, your regional conference can help you face this
next generation of engineering challenges, leading to
increased innovation, efficiency and product success.
-
Uncertainty Quantification in Computational Fluid Dynamics
Course, Chaussee de Waterloo, 72, 1640 Rhode-Saint-Genese, Belgium, October 24, 2011
Increasingly powerful computers enable routine flow
simulations in complex systems. How accurate are the
resulting predictions? Are the mathematical and physical
models correct? Do we have sufficient information to define
the operating conditions? In general, how can we establish
error bars on the results?
-
Workshop "Multiphysical Modelling in OpenFOAM"
Workshop, Riga, Latvia, October 20, 2011
Attention!!!
You have the last chance to confim your applications to
Workshop "Multiphysical Modelling in OpenFOAM". The abstract
submission will be closed this week (September 16th). The
on-line application form is available at
http://www.modlab.lv/en/openfoam.php
-
Mentor Graphics Mechanical Analysis Division User Meeting - North America
User Conference, United States, October 20, 2011
Please join us at the 1st US technical training conference
for FloEFD, FloTHERM, FloVENT* and MicReD/T3sterusers by
Mentor Graphics. The conference will take place October 20-
21, 2011. The packed agenda is tailored especially for
users such as yourself and have been designed to enable you
to learn valuable information about our products and
provide you with insightful technical training.
-
ANSYS Conference & 29. CADFEM Users' Meeting
Conference, ICS Internationales Congresscenter Stuttgart, Stuttgart, Germany, October 19, 2011
Engineering the System -
One of the largest annual user conferences around the
numerical simulation in product development in Europe!
-
15th ERCOFTAC-SIG15/IAHR Workshop on Refined Turbulence Modelling
Workshop, EDF R&D center, Chatou (Paris), France, October 17, 2011
Three Test Cases are going to be collaboratively computed.
The corresponding presentations by the reference experiment
originators and a lecture overviewing _the status and trends
in modelling and simulation of turbulent flows_ will be
given in addition to the cross-plot presentations.
* Case 15.1: Flow and heat transfer in a suddenly
expending pipe
* Case 15.2: Flow and heat transfer a wall-bounded pin
matrix
* Case 15.3: Flow in a crossflow-typeT-junction
-
FREE Webinar: Training on Introduction to FINE/Open v2.11-1
Online Event, October 17, 2011
FINE/Open is a powerful CFD Flow Integrated Environment
dedicated to complex internal and external flows. It
combines completely unstructured hexahedral grids with an
efficient preconditioned compressible solver with fast
agglomerated multigrid acceleration and adaptation
techniques. This makes the product unique in the CFD community.
-
Free Webinar: Training on AutoGrid5 v8.9-2: ZR Effects & Meridional Control Lines
Online Event, October 13, 2011
AutoGrid5 is a full automatic hexahedral grid generator for
all types of rotating machinery: complex axial, radial, and
mixed-flow configurations.
-
Integrating OpenFOAM into Automotive CAE Systems: Companion Products and Experiences
Workshop, Schloss Birlinghoven, Sankt Augustin, Germany, October 12, 2011
The event will focus on new developments relating to
OpenFOAM. Presentations from
- Volkswagen
- Audi
- Distene S.A.S
- Fraunhofer SCAI
- CEI
and more.
-
FREE Webinar: Optimization of Volute Tongue Shape Using CFD & Optimization Search Methods
Online Event, October 10, 2011
Dr. David Japikse, Owner and CEO of Concepts NREC (CN), and
Dr. Edward Childs, Associate Director of Support and
Documentation, will be the presenters for this Webinar
which will explore recent CN work concerning the
optimization of volute tongue shapes using CFD and
Optimization Search Methods.
-
2011 ANSA & mETA German Open Meeting
Conference, Auditorium im BusinessPark Echterdingen, Leinfelden-Echterdingen, Germany, October 6, 2011
BETA CAE Systems S.A. has the pleasure to invite you to the
2011 ANSA & mETA German Open Meeting in Germany, hosted by
LASSO Ingenieurgesellschaft mbH. The event will take place
on October 6th, 2011 at the Auditorium of BusinessPark
Echterdingen, Leinfelden-Echterdingen, Germany.
-
Simulation Open Day
Conference, Airport House, Purley Way, Croydon, United Kingdom, October 6, 2011
A free Simulation Open Day with a chance to meet our
Computer Aided Engineering (CAE) Simulation experts and ask
questions about your specialist fields.
-
Simulating Turbulent Flow
Seminar, Scandic Hotel Copenhagen, Copenhagen, Denmark, October 5, 2011
Simulating Turbulent Flow, this Info Day aims to show how
CFD simulation can meet your growing demands for accurately
and efficiently capturing the effects of turbulence.
-
PLM Road Map 2011
Conference, The Inn at St. John's, Plymouth, United States, October 4, 2011
PLM Road Map is a strategic conference focused on the
critical trade-offs that shape product development. Find out
first hand which issues are confronting end users.
-
Free Materialise & Simulia Medical Engineering Seminar
Seminar, Technologielaan 15, 3001 Leuven, Belgium, October 4, 2011
Materialise and Dassault Systemes Simulia Benelux are
pleased to announce their co-organized Medical Engineering
Seminar which will take place on 4 October 2011, at the
Materialise HQ in Leuven, Belgium. The Medical Engineering
Seminar is a meeting for and by users and aims to bring
together biomechanical engineers currently working, or
interested in patient-realistic finite element modeling.
-
4th Symposium on Hybrid RANS-LES Methods
Conference, Beijing, China, September 28, 2011
Hybrid modelling methods of turbulent flows, combining RANS
and LES techniques, have received increasing attention in
aerodynamic applications aiming at high Reynolds numbers.
The present Symposium addresses the most recent and new
development on advanced URANS, DES and other hybrid RANS-
LES techniques, covering both fundamentals of flow physics
modelling and applications to industrial flow problems.
-
Detonation Physics and Modelling - Part 2
Course, University of Cambridge Dept of Physics, Cavendish Lab., JJ Thomson Avenue, Cambridge, United Kingdom, September 28, 2011
Prof M Braithwaite, Prof J Field, Dr N Nikiforakis.
The course will cover basic concepts on shock & detonation
physics for gaseous, homogeneous & heterogeneous
explosives & will introduce the participants on modelling,
hydrocode simulation & experimental techniques. It
will be given in 2 parts. Participants may register for
either or both parts (discounts apply). The 2nd part will
be devoted on CFD simulation, including formulations &
numerical methods for gaseous & condensed-phase combustion.
-
OpenFOAM: a two-day introductory course
Course, Scandic Crown Hotel, Gothenburg, Sweden, September 28, 2011
This two-day course is delivered by Prof. H. Jasak, one of
the main developers of OpenFOAM.
-
OpenFOAM: a two-day advanced course
Course, Scandic Crown Hotel, Gothenburg, Sweden, September 28, 2011
This two-day course is delivered by Dr. H. Rusche, one of
the main developers of OpenFOAM.
-
modeFRONTIER - GT-SUITE/GT-POWER Webinar
Online Event, September 27, 2011
Gamma Technologies and Esteco invite you to attend a joint
webinar to show the benefits which can be achieved by
coupling the process integration and design optimization
software modeFRONTIER with GT-SUITE/GT-POWER.
Webinar starts at 2pm GMT
-
ERCOFTAC: Flame Stabilisation for Industrial Burners
Course, GE Global Research, Munich, Germany, September 26, 2011
The aim of this two day course is to provide:-
a)An overview of burner types and stabilisation
methods
b)Underlying design principles and resulting scaling
rules
c)Perspective on power, heat flux and emissions in
power generation, petrochemical and metallurgical heating
processes
d)Understanding of turbulence
chemistry interaction, with a view to RANS , LES and DNS
Experimental techniques
e)Round table discussion
-
Detonation Physics and Modelling - Part 1
Course, University of Cambridge Dept of Physics, Cavendish Lab., JJ Thomson Avenue, Cambridge, United Kingdom, September 26, 2011
Prof M Braithwaite, Prof J E Field FRS, Dr N Nikiforakis.
The course will cover basic concepts on shock and detonation
physics for gaseous, homogeneous and heterogeneous
explosives and will introduce the participants on modelling,
hydrocode simulation and experimental techniques. The course
will be given in two parts. Participants may register for
either or both parts (discounts apply). The first part will
focus on the physics, experiments and reduced modelling.
-
2011 ANSA & mETA North American Open Meeting
User Conference, The Inn at St. John's, Plymouth, United States, September 21, 2011
BETA CAE Systems S.A. has the pleasure to invite you to the
2011 open meeting in USA, hosted by BETA CAE Systems USA,
Inc.
-
Practical Introduction to CFD
Online Event, September 20, 2011
This course offers the attendees the fundamental knowledge
for using CFD in real life engineering applications. Through
a simple and moderately technical approach, this course
describes the steps in the CFD process and provides benefits
and issues for using CFD analysis in understanding of
complicated flow phenomena and its use in the design
process. Best practices for reducing errors and
uncertainties in CFD analysis are also presented in the
course.
-
The 6th Symposium on Numerical Analysis of Fluid Flow and Heat Transfer
Conference, G-Hotels, Halkidiki, Greece, September 19, 2011
This meeting is a part of the International Conference of
Numerical Analysis and Applied Mathematics 2011. The
objective of the symposium is to bring together scientists
working on numerical and also experimental issues of fluid
dynamics and heat transfer.
|
