-
Design of a Waste Heat Recovery System 5-Day Training
Course, Bangalore, India, February 20, 2016
The objective of this course is to provide participants
theoretical and practical training on designing waste
heat recovery systems for improving energy efficiency in
existing and new energy intensive systems.
-
Good (and bad) Vibrations: Designing for Flow Induced Vibration with Simulation
Online Event, February 16, 2016
This educational webinar will feature presentations from
Oil & Gas engineering and management consultants Norton
Straw and CD-adapco’s Oil & Gas technical specialist Alex
Graham. They will outline a typical FIV study: starting
with the EI guidelines, followed by CFD and FEA
simulations.
-
Webinar: Rapid Analysis and Design of Cooling Flow Paths for Turbine Machinery
Online Event, February 15, 2016
Join this webinar on 15th February to learn about new
developments in systems simulation engineering within the
field of turbine machinery offering rapid design of
cooling flow paths.
-
Discover Better Designs, Faster
Workshop, Courtyard Columbus Airport, Columbus, United States, February 11, 2016
This event will show you how to achieve the fundamental
step into design exploration, i.e. directly linking CAD
with CAE simulation.
Demonstrations will highlight a complete workflow from
automated meshing to our unique optimization algorithms
which enable CAE engineers to perform multiple
simulations seamlessly for robust design exploration and
critical optimization studies.
-
The What, Why and How of Simulating Joule Heating
Online Event, February 11, 2016
This web seminar will explore the physical phenomena of
Joule heating and present standard calculations that can
be used to predict the amount of heat dissipated based on
the electrical situation and conductor material. In
addition, options for modeling Joule heating in
engineering simulation will be shown through examples,
including a discussion of the different advantages and
disadvantages.
-
Topical Problems of Fluid Mechanics 2015
Conference, Dolejskova 5, Prague, Czech Republic, February 10, 2016
The aim of the conference is to discuss contemporary
problems of fluid mechanics and to bring out latest results.
Scope of the conference covers the whole field of fluid
mechanics. Papers on experimental, numerical and theoretical
investigations of problems in fluid mechanics are welcome.
Also reports on new mathematical and/or experimental
approaches to solution of fluid flow problems are of great
interest.
-
9TH INTERNATIONAL CONFERENCE ON COMPUTATIONAL FLUID DYNAMICS
User Conference, SİDE HOTEL, ISTANBUL, Turkey, February 8, 2016
ICCFD, a biennial event, is the merger of two important
CFD conferences: the International Conference on
Numerical Methods in Fluid Dynamics, ICNMFD
(since 1969) and International Symposium on Computational
Fluid Dynamics, ISCFD (since 1985). The first ICCFD
conference was held in 2000 in Kyoto, the seventh in 2012
in
Hawaii, the eighth in 2014 in Chengdu, and the ninth
conference, ICCFD9, will be held in Istanbul, Turkey in
July 11-15, 2016.
-
Axial Compressor Design 5-Day Training
Course, Zug, Switzerland, February 6, 2016
This comprehensive course includes multiple topics,
starting with the basics of fluid dynamics and ending
with a detailed overview of multistage centrifugal
compressor design.
-
A Better Understanding of Particulate Flows and Fluid Flows
Online Event, February 4, 2016
Coupling Computational Fluid Dynamics (CFD) with Discrete
Element Modeling (DEM) is a powerful combination to
investigate the effects of particulate flows and fluid
flows.
This webinar will highlight how these technologies have
been applied to shorten product process development
cycles and reduce energy requirements.
-
Discover Better Designs, Faster
Workshop, Hartford Marriott Farmington, Farmington, United States, February 3, 2016
This event will show you how to achieve the fundamental
step into design exploration, i.e. directly linking CAD
with CAE simulation.
Demonstrations will highlight a complete workflow from
automated meshing to our unique optimization algorithms
which enable CAE engineers to perform multiple
simulations seamlessly for robust design exploration and
critical optimization studies.
-
Master the Fastest Route from CAD to CFD
Workshop, Courtyard Pittsburgh Arpt Settlers Ridge, Pittsburgh, United States, February 2, 2016
In this workshop, we will cover the latest surface
wrapping and meshing technologies that eliminate manual
repair from the CFD process. This assures a faster route
from CAD to flow simulation, and gives engineers the
opportunity to concentrate on engineering analysis.
-
Discover Better Designs, Faster
Workshop, Courtyard Philadelphia Willow Grove, Willow Grove, United States, February 2, 2016
This event will show you how to achieve the fundamental
step into design exploration, i.e. directly linking CAD
with CAE simulation.
Demonstrations will highlight a complete workflow from
automated meshing to our unique optimization algorithms
which enable CAE engineers to perform multiple
simulations seamlessly for robust design exploration and
critical optimization studies.
-
One Month Evening batch-Course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA), From 01 st February 2016
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, February 1, 2016
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Classes on all seven days of the week.
Theory 2 hours per day , Lab/practical training 4 hours per
day.
-
Free CFD Toolbox for MATLAB - Online Course
Online Event, February 1, 2016
Online course on CFD simulations in QuickerSim CFD Toolbox
for MATLAB.
-
Subsea: Improving Safety and Mitigating Risk through Simulation
Workshop, Houston Marriott Energy Corridor, Houston, United States, January 28, 2016
The day's events will include guest presentations
discussing the use of simulation in real-world
engineering projects. Topics covered will include
Erosion, Thermal analysis, Flow-Induced and Vortex-
Induced Vibration, and Separators. We will have a demo
and hands-on session with STAR-CCM+®, CD-adapco's
flagship simulation tool.
-
GET FIRED UP! Combustion Simulation in the Process Industry
Online Event, January 28, 2016
In this webinar, you will learn the various ways to use
CFD simulation to improve and optimize combustion system
designs via validation and case studies. A technical
specialist will use state-of-the-art simulation software
to demonstrate the ease of use and set-up of
optimization/design space exploration of a combustion
simulation.
-
Webinar: Rapid gas turbine combustion chamber analysis and design using a system modelling approach
Online Event, January 26, 2016
Flownex invites you to an exciting introduction to new
developments in systems simulation engineering with in the
field of turbine combustion chamber analysis and design. We
invite you to a webinar where we will discuss the full cost,
risk and time saving advantages as well as the incredible
accuracy of the simulations.
-
How CFD Improves Propeller Performance for Efficient Ship Propulsion
Online Event, January 21, 2016
During this webinar, Wärtsilä Propulsion will show that
with the aid of CFD simulations of the propeller in
behind ship condition, a direct feedback loop has been
established to the propeller designers. In addition,
Lloyd’s Register will demonstrate how they use relatively
fast numerical methods for calculating the performance of
a propeller in the wake flow of a ship.
-
Exploring Effective Urea/SCR Aftertreatment CFD Simulations
Online Event, January 20, 2016
Are you getting the accuracy and speed you need from your
engine
aftertreatment simulations?
Join us for a webinar to find out how to eliminate user
meshing and take
advantage of a comprehensive CFD tool for urea/SCR design.
-
CFD in MATLAB - 2-Day course on QuickerSim CFD Toolbox
Course, Warsaw, Poland, January 20, 2016
The course will be focused on efficient solving of CFD
problems (including nonlinear material models, heat
transfer, applications to teaching etc.) using a free of
charge QuickerSim CFD Toolbox for MATLAB. Tips & Tricks and
many examples will be given.
-
Simulating Flow Induced Noise and Vibration for Accurate Modeling
Online Event, January 19, 2016
Presenters will cover how recent advances in hardware
performance, combined with newly developed methods in
simulation software and Vibro-Acoustic and Aero-Vibro-
Acoustic technology like wave6®, present new
opportunities. Attendees will learn how they can more
accurately model flow induced noise and vibration across
a broad frequency range.
-
First of their kind Gas Turbine Workshops in India - CFD Workshops
Workshop, CMR Institute of Technology No.132, AECS Layout, Kundalahalli,, Bengaluru, India, January 18, 2016
It consists of 3 workshops on CFD for Gas Turbines by Dr.
Bijay K. Sultanian, an international CFD expert & trainer.
-
Robust System Design with Simulation
Online Event, January 14, 2016
This seminar will explore the capabilities of simulation
software to identify families of feasible designs,
understand design sensitivities, and predict system
robustness. A specific electronics cooling example will
be optimized and tested for sensitivity and robustness
under varying manufacturing and usage scenarios to
produce a better design faster than ever before.
-
Flowing Matter 2016
Conference, Faculty of Engineering of the University of Porto, Porto, Portugal, January 11, 2016
This conference will serve as an important event to get the
three scientific communities involved in the COST Action
MP1305 closer to each other: complex fluids (suspensions,
granular materials, glasses, rheology), active matter
(biological and synthetic micro-swimmers, bird flocks,
insect swarms), and complex flows (turbulence, chaotic
flows). Contributions that cover interdisciplinary aspects,
i.e. that cross two or more areas are particularly encouraged.
-
Rotor Dynamics and Bearing Design - 3 Day Training Course
Course, 1500 District Avenue, Burlington, United States, January 1, 2016
This course covers rotor dynamics analysis and bearings
simulation for different types of rotors. Rotor dynamics
fundamentals, basic design rules and analyses according
API and other standards, bearing simulation aspects are
explained.
-
Thermal Simulation Workshop
Online Event, January 1, 2016
The SimScale Thermal Analysis Workshop is a free course
that teaches mechanical designers and engineers how to
use thermal simulation in the web browser for optimizing
cooling and heating processes for improved energy
efficiency and durability.
-
One Month course on Advanced CFD analysis from 01-June-2017 (Morning and Evening batch) Theory+Ansys Fluent,CFX ,ICEMCFD Hexa
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, January 1, 2016
Perfect blend of Theory, Software and live projects.
Classes conducted by Mr.Rudresh Ganganna , Former
Scientist- ISRO.
Know about your faculty,
https://in.linkedin.com/in/rudresh-ganganna-b0684517
-
Advanced training programme on CFD analysis (Saturday and Sunday 8 AM to 10 AM IST)
Online Event, December 26, 2015
Duration: 10 weeks ( 20 sessions)
Training mode: 100 % live interactive sessions through
skype, desktop sharing, very close to class room sessions.
Certificate: Industry recognized certificate will be provided.
Next batch: from 26-December-2015
Registration:Last date for registration ,18-December-2015
Registration and payment of fees:Online payment gateway in
our website (Pay pal /Direc pay)
-
Conference on Computational PDE 2015
Conference, TIFR Center for Applicable Mathematics, Bangalore, India, December 21, 2015
The conference brings together researchers working on finite
difference and finite volume methods for solving
Partial Differential Equations to present their latest
research work. We
encourage
you to submit contributed papers on novel and high order
accurate
schemes, and on the numerical analysis of such schemes. We also
encourage participation from mathematics and engineering
departments and hope that the conference will provide a
platform for
interdisciplinary discussions.
-
2nd International Conference on Computational Methods in Engineering and Health Sciences
Conference, Department of Aerospace Engineering, Universiti Putra Malaysia, Serdang, Malaysia, December 19, 2015
Two day International Conference
on Computational Methods in Engineering and Health
Sciences (ICCMEH-2015) serves the purpose of bringing
together the computational scientists and engineers and
medical fraternity from various interdisciplinary domains
under a common forum. The theme of this
conference will be broad covering
several analytical and numerical techniques, and novel
applications of computational techniques to solve
problems in engineering, health sciences disciplines
-
Self Financed One Week Training on Computational Fluid Dynamics (CFD) with OpenFOAM
Course, Department of Mechanical Engineering, VNIT, Nagpur, India, December 14, 2015
The goal of the present training is to objectively
appreciate the open source CFD code OpenFOAM for use on
various types of problem. This training gives the platform
to the participant to understand OpenFOAM for basic to
advanced to programming level.
-
Sunday batch-Course on CFD (ANSYS FLUENT,CFX and ICEMCFD HEXA),From 13-December- 2015
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, December 13, 2015
Week end batch course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Class duration: Sunday 9 Am to 3 PM.
Ten sundays,most suited for working professionals and out
station students.
-
How to Dramatically Improve Your CFD Design and Analysis Time
Online Event, December 10, 2015
Are you under more pressure than ever to work faster and
more
efficiently? What if
you could improve your data processing times by 10-30%?
Take advantage of the increased speed and lower memory
usage in
Tecplot 360 EX by
converting your existing data files to SZL (.szplt)
format. A small
investment of
time up front can lead to big payoffs later on during
design and
analysis.
-
Thermal Modeling Approaches for Printed Circuit Boards (PCBs)
Online Event, December 10, 2015
This seminar will examine the main methodologies for
modeling printed circuit boards in thermal simulations of
electronic assemblies. The methods vary from fully-
detailed models that resolve all the traces to a
simplified geometric model with averaged properties. Each
method will be described and demonstrated, and the
advantages and disadvantages of each approach will be
detailed.
-
Workshop for Multi-Disciplinary and Multi-Objective Design Optimisation
Workshop, The Venture Centre, Sir William Lyons Rd, COVENTRY, United Kingdom, December 9, 2015
Understand how worthwhile it is to implement design
optimisation to overcome the increasing market
challenges. modeFRONTIER is used in various engineering
disciplines and for numerous applications, supporting
designers and engineers, operating in all industrial
sectors, to identify the best design solutions.
-
Webinar: Modeling Comprehensive Oil & Gas Industry Solutions Using Flownex SE
Online Event, December 8, 2015
Flownex® SE is a 1D thermal fluid analysis package that
provides a complete solution for system and sub-system
level design. Join this webinar on 8th December to see
how Flownex® SE can help you to determine pressure drop
(flow) and heat transfer (temperature) for the connected
components of a complete system in steady state and
transient, e.g. pumps or compressors, pipes, valves,
tanks and heat exchangers.
-
11th International Conference on CFD in the Minerals and Process Industries
Conference, Melbourne Convention and Exhibition Centre (MCEC), Melbourne, Australia, December 7, 2015
The conference will cover the application of CFD in process
industries such as chemicals, food, bio, oil/gas, power
generation, mineral processing & metal production.
Topics of interest include: coal combustion, hydrocyclones,
casting, fluidised beds, smelting, furnaces, slurries,
steelmaking, crystallisation, stirred tanks, granular flow.
Mini-symposia topics for this conference:
- Gas-particle Flows
- Micro-engineering & Bio-engineering
- GPUs and Next Generation Computing
-
Discrete Element Modelling (DEM) to Aid the Development and Manufacture of Composite Particulates for the Pharmaceutical, Food
Workshop, College Park Marriott Hotel & Conference Center, East Hyattsville, United States, December 7, 2015
Please join us for this workshop as we explore the
benefits of applying CFD and DEM in the pharmaceutical,
food and chemical process industries.
-
MDX: Reducing Product Development Costs through Simulation
Workshop, Houston Marriott Energy Corridor, Houston, United States, December 7, 2015
If you develop products in support of oil & gas projects
(subsurface, subsea, process & separation) and want to
reduce development time and costs while improving
performance, this workshop is for you.
-
Open Software in Continuum Mechanics 2015
Seminar, Moscow, Russia, December 4, 2015
The conference is intended for practical experience
exchange between researchers, who use open source
packages for continuum mechanics problems solving.
-
Product Release Webinar: SPEED v10 and Beyond
Online Event, December 3, 2015
This product release webinar will take you through the
most recent updates to our industry-leading Electric
Machine Design solution, SPEED™, and will offer an
exclusive preview of what is planned in future releases.
We will also introduce you to our solution for
Multidisciplinary Design Exploration (MDX) of electric
machines, helping you reduce both the cost and size of
your designs as well as increase their lifetime and
reliability.
-
Design Exploration & Optimization with Heat Transfer
Workshop, Courtyard Montreal Airport, Montreal, Canada, December 2, 2015
Join us for a complimentary seminar and hands-on workshop
that will address the barriers to implementation of
design exploration and optimization. It will also
showcase how these techniques can be applied when
simulating heat transfer for mechanical and electronic
system design.
-
Reducing Development Costs of Subsurface Equipment through Simulation
Online Event, December 1, 2015
This online event will focus on the role of simulation in
the design of drill bits, Inflow Control Devices or
Valves (ICDs, ICVs), Electric Submersible Pumps (ESPs),
and other down hole tools.
-
CFD User Meeting: A Better Powertrain Simulation Process
Workshop, The Baronette Renaissance Detroit-Novi Hotel, Novi, United States, December 1, 2015
We are pleased to announce a complimentary workshop being
held in the Metro Detroit area on how to optimize your
powertrain design. Presenters will look at how to apply
Multidisciplinary Design Exploration methods to look at
coolant and oil flows as well as heat transfer through
the engine to reduce peak temperatures and prevent
failure.
-
ERCOFTAC-Uncertainty Management and Quantification in Industrial Design and Analysis, 30 Nov. - 1 Dec 2015, EDF, Paris, France
Course, EDF, PARIS, France, November 30, 2015
The aim is to share the aspirations and requirements of
leading companies in the fields of aerospace, energy,
Marine, F1, and chemical process; review emerging methods
and techniques and how these are being deployed; and define
the current state-of-the-art and map out-near term future
possibilities.
-
European Autumn Gas Conference 2015 - EAGC
Conference, InterContinental Geneva,7-9 Chemin Du Petit-saconnex, , Geneva, Switzerland, November 24, 2015
Celebrating its 30th annual edition, the European Autumn Gas
Conference - EAGC 2015 - remains a world class benchmark in
discussion and engagement amongst Europe's elite business
leaders operating within the European gas supply chain who
are looking to adapt and overcome the commercial,
geopolitical and macro-environmental challenges within the
region.
-
Fire and Explosion Modelling for Advanced Risk Analysis
Workshop, Mechanical Engineering Department, IIT Roorkee, Roorkee, India, November 24, 2015
Application of 3D CFD modelling techniques for advanced risk
analysis.
-
13th Multiphase Flow Conference & Short Course - Joint HZDR & ANSYS Germany Conference
Conference, Hemholtz-Zentrum Dresden-Rossendorf, Dresden-Rossendorf, Germany, November 24, 2015
Multiphase flows are of great interest to a large variety
of industries. The power generation, nuclear reactor
technology, food production, chemical process, aerospace
and automotive industries are all driving forces in this
complex field.
-
Training: Foundations of Reliability Engineering Data Analysis & Modeling
Course, Stockport, United Kingdom, November 23, 2015
The immensely popular G400 series is composed of Weibull
and Life Data Analysis followed by an introduction to key
principles in accelerated life testing (ALT), design of
experiments (DOE), reliability block diagrams (RBDs) and
repairable systems modeling.
-
Advanced training on CFD Analysis (Ansys Fluent ,CFX and ICEMCFD HEXA)
Online Event, November 23, 2015
Advanced level course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Class timings,Morning: 6:30 AM to 8 AM
(IST),Monday to Friday.Total duration 2 months.
Course fee: Sixty thousand Indian Rupees.
-
Visualize and explore your transient data within Tecplot.
Online Event, November 18, 2015
Free webinar, designed to ensure you will make the best
possible use of Tecplot for transient data.
-
FINE/Marine Seminar : Improving Ship Design
Seminar, TU Delft, Mekelzaal 1 (1st floor), Mijnbouwstraat 120, Delft, Belgium, November 17, 2015
NUMECA International in cooperation with van Oossanen naval
architects is pleased to invite you to an afternoon of
presentations, discussions and demos on how to improve ship
design using Fine/Marine. Established naval architects,
hydrodynamicists and CFD experts from various places in Europe
will animate the seminar and advise you best.
-
Mixing Simulation with Ease: Automating the Mixing Simulation Set-up Process
Online Event, November 17, 2015
In this webinar, users will learn about performing a
mixing simulation for a variety of cases, such as single
phase, gas-liquid (G-L) and solid-liquid (S-L), using an
automated process for setting up a simulation.
-
ASME Special Session on CFD Aerodynamics
Conference, ASME 2015 IMECE will be held at the Hilton Americas , Houston, United States, November 13, 2015
ASME's International Mechanical Engineering Congress and
Exposition (IMECE) is the largest interdisciplinary
mechanical engineering meeting in the world.
-
Webinar: CFD – The Basic What, Why and How?
Online Event, November 12, 2015
Join our Fluid Dynamics technical team for an on-line CFD
awareness webinar on 12 November. This event will focus
on typical issues to be considered before a CFD software
package is purchased or a technical consultant is engaged
in order to maximise ROI.
-
OpenSource CFD for Industry - High-level Development
Course, Hörsalsvägen 7A, Gothenburg, Sweden, November 12, 2015
The present course is the second of two courses (2+2 days),
teaching high-level development using the OpenFOAM
technology and C++. It covers the directory and code
organization, and how to implement new applications and
libraries such as solvers, turbulence models and boundary
conditions. A crash-course in C++ gives a basic
understanding of the code syntax and object orientation. The
course is given as a hands-on workshop. The course language
is English.
-
Increase Productivity by Closing the Gap Between CAD and Analysis with Automated Workflows
Online Event, November 12, 2015
This online event is tailored specifically to users
interested in significantly increasing his or her
engineering productivity through a consistent, repeatable
and easily automated workflow for taking CAD directly to
mesh. Included in this webinar is a live demonstration
to walk users through the entire CAD to mesh workflow,
highlighting the benefits of automation.
-
ERCOFTAC-Hybrid RANS-LES Methods for Industrial CFD:Overview, Guidance and Examples
Course, ANSYS, Otterfing, Germany, November 9, 2015
An overview of turbulence modelling.
A firm foundation in the theory and ideas underlying, RANS,
LES and Hybrid RANS-LES techniques.
Recommendation and guidance for the appropriate and
effective application of Hybrid RANS-LES.
Examples from real-world engineering simulations, using the
DES class of models.
-
Unsteady Simulations for Industrial Flows: LES, DES, hybrid LES-RANS and URANS
Course, Chalmers University of Technology, Gothenburg, Sweden, November 9, 2015
A three-day course in
''Large Eddy Simulation (LES), hybrid LES-RANS, Detached
Eddy Simulation (DES) and unsteady RANS''
is given at Chalmers, Gothenburg, Sweden, 9-11 November, 2015.
-
OpenSource CFD for Industry - Basic Usage
Course, Hörsalsvägen 7A, Gothenburg, Sweden, November 9, 2015
The present course is the first of two courses (2+2 days).
It covers the basic knowledge that is needed to efficiently
use OpenSource software, while the follow-up course extends
the knowledge to high-level code development. This basic
course is mainly based on the Linux operating system, the
OpenFOAM OpenSource CFD toolbox, and the Paraview
visualization software. The course is given as a hands-on
workshop. The course language is English.
-
Advanced Combustion Simulation Symposium
Seminar, University of Central Florida, Orlando, United States, November 9, 2015
The University of Central Florida’s Center for Advanced
Turbomachinery and Energy Research (CATER) and
CD-adapco® cordially invite you to participate in this
one-day dynamic symposium on the UCF campus. Come hear
about and discuss advanced capabilities for simulating
combustion with CFD – with time at the end for optional
hands-on use of the software.
-
Addressing Scale Up, Mixing and Other Challenges in the Pharma, Biotech & Chemical Process Industries
Workshop, Princeton Marriott at Forrestal , Princeton, United States, November 5, 2015
Computational Fluid Dynamics (CFD) and particle modeling
with Discrete Element Method (DEM) have been identified
as key enabling technologies in finding solutions to many
of the challenges that surround scale-up; capable of
reducing operating costs across manufacturing and quality
divisions.
Please join us for this workshop as we explore the
benefits of applying CFD in the chemical process,
pharmaceutical and biotech industries.
-
Mixing In Stirred Tanks - A One-Day Training Course
Course, 178 Ryders Ln, New Brunswick, NJ 08901, New Brunswick, United States, November 5, 2015
The course will communicate principles of mixing in stirred
tanks, provide recommendations for process design and scale-
up, plus enable participants to apply these principles and
recommendations to their mixing processes/problems.
-
CONSELF CFD Webinars Weeks
Online Event, November 4, 2015
7 Free Webinars, November 4-19, 2015, (ENG and ITA versions).
From introductory to highly specific topics, everything will
find room in November with CONSELF Webinar Weeks! Visit
https://conself.com/events/ to discover the one that best
fits your field. And soon others will be added. Stay tuned.
-
ERCOFTAC - Best Practices in Combustion CFD, Flame Stabilization, & Combustion Instabilities 3-4 Nov 2015, Delft, Netherlands
Course, TU Delft, Netherlands, November 3, 2015
Design and operation of modern combustion systems
requirements are high efficiency, low emissions & good flame
stability. CFD has become a powerful tool in design and
analysis , but it is not a unique modeling method. Many
models are available each having a range of applicability,
computational cost and accuracy. Thus, CFD experts doing
turbulent combustion simulations, in addition to std CFD
skills, need skills in combustion modeling for correct
analysis. This course addresses this need.
-
Addressing Scale Up, Mixing and Other Challenges in the Pharma, Biotech & Chemical Process Industries
Workshop, Courtyard Boston Cambridge, Cambridge, United States, November 3, 2015
Computational Fluid Dynamics (CFD) and particle modeling
with Discrete Element Method (DEM) have been identified
as key enabling technologies in finding solutions to many
of the challenges that surround scale-up; capable of
reducing operating costs across manufacturing and quality
divisions.
Please join us for this workshop as we explore the
benefits of applying CFD in the chemical process,
pharmaceutical and biotech industries.
-
Simulation Methods Used for the In-flight Icing Certification of Aircraft, Rotorcraft and Jet Engines
Course, Holiday Inn Express DFW, Dallas-Fort Worth, United States, November 2, 2015
The course covers modern CFD-Icing methods, that, when
working as a
direct extension of CFD-Aero
technologies, have become an indispensable, if not a primary
tool, in the
certification process of
aircraft. Such an integrated CFD-Aero + CFD-Icing + Testing
approach
provides a cost-effective aid-to-
design-and-to-certification, when made part of a
well-structured
compliance plan.
-
One Month online-Course on CFD (ANSYS FLUENT,CFX, Design modeller and ICEMCFD HEXA), From 30 October 2015
Online Event, October 30, 2015
Industry oriented course on CFD covering theory, ANSYS
FLUENT, ANSYS CFX, ANSYS Design modeller and ANSYS ICEMCFD
(HEXA) softwares.Most suited for working professionals and
students who could not attend such courses during regular
office hours.
-
CFD Powered by HPC: Real World Solutions in Real Time
Online Event, October 29, 2015
This webinar will discuss and demonstrate how highly
scalable simulations on HPC platforms can help push the
boundaries of your simulations. We will highlight the
cost benefits, whether you are interested in solving
large-scale multidisciplinary engineering problems or
want to maximize your CFD analysis throughput during
simulation-led design.
-
Applied LES, DES and URANS for Industry
Course, Chalmers University of Technology, Gothenburg, Sweden, October 28, 2015
A three-day course in "Applied LES, DES and URANS for
Industry" will be given at Chalmers, Gothenburg, Sweden,
between 28-30 October 2015.The course will cover three
important applications of CFD techniques in industry:
prediction using unsteady CFD simulations (LES, DES, PANS,
URANS), CFD for flow control and aerodynamic shape
optimization. We believe that the course is useful for
engineers and researcher in all industrial sectors where
unsteady flows are of importance.
-
IDAC Information Day - ANSYS FEA Mechanical Product Suite Review
Seminar, Airport House Business Centre, London, United Kingdom, October 28, 2015
IDAC are delighted to invite you to our Information Day on
28th October.
-
ESI Cloud Solutions Webinar
Online Event, October 27, 2015
ESI Cloud Solutions for Cloud/SaaS
-
ERCOFTAC Best Practice for Eng CFD
Course, GE, Munich, Germany, October 22, 2015
This course is targeted at relatively new and improving CFD
analysts in engineering industries and consultancies.
It provides the knowledge to effect a step-change in the
accuracy and reliability of CFD practices across a range of
engineering applications relevant to the power generation,
aerospace, automotive, built environment and turbomachinery
sectors - amongst others.
-
Using Engineering Software to Teach Turbulence
Online Event, October 22, 2015
MIT professor Emilio Baglietto will demonstrate how
engineering software can be integrated into course
curriculum to improve the understanding of turbulent
flows. Real-world course examples will include turbulent
phenomena, model performance and applied turbulence.
-
ERCOFTAC - Lattice-Boltzmann Methods for Ind. Apps: Overview, Guidance & Examples, 19-20 October 2015, Marseille,France
Course, Aix-Marseille Universite, Marseille, France, October 19, 2015
Lattice-Boltzmann Methods (LBM) became recently a very
powerful tool for engineering in Computational FLuid
Dynamics. They represent a very efficicent competitor to
Mavier-Stokesbased Tools. This course aim at presenting the
fundamental of LBM(day 1) and state-of-the-art applications
for engineering problems issued from major industrial
companies(Airbus, Renautl,...) Examples will illustrate
application in different fields: aerodynamics, acoustics,
and heat transfer
-
ESI OpenFOAM User Conference 2015
User Conference, Dormero Hotel, Stuttgart, Germany, October 19, 2015
ESI Group presents the 3rd official OpenFOAM User Conference
and opens up another opportunity for all OpenFOAM users
worldwide to meet and interact with the OpenFOAM developers,
support and training team and find out more about new
developments and interesting projects in OpenFOAM.
Agenda:
Day 1 & 2 - Conference with key notes and parallel industry
sessions
Day 3 - Parallel Training Workshops: Tips & Tricks, GUI
environment and Meshing in OpenFOAM
-
The International CAE Conference 2015
Conference, Hotel Parchi del Garda, Verona, Italy, October 19, 2015
Pacengo del Garda (Verona) - Italy, 19 - 20 October 2015
-
Introduction to Reliability Engineering Training Course – Special Discounted Rate for October: £99
Course, Stockport, United Kingdom, October 14, 2015
This course helps cut through the jargon surrounding
Reliability Engineering explaining what is meant by
Reliability. It defines in a no-nonsense way what all the
various metrics mean and where and when it is applicable
to use them. Wilde is offering a special discounted rate
for this course in October.
-
Simulation von rotierenden Maschinen
Seminar, Courtyard by Marriott München City East, München , Germany, October 13, 2015
Das Seminar vermittelt Wissen über:
Bewertung der Betriebssicherheit von Strömungsmaschinen
Optimierung von Leistungsaufnahme, Wirkungsgrad und
Energiebedarf
Berechnung des Schwingungsverhaltens von
Maschinenkomponenten
Gesamtbetrachtung von Strömungsmaschinen durch Fluid-
Struktur-Koppelung
-
Workshop for Multi-Disciplinary and Multi-Objective Design Optimisation
Workshop, The Venture Centre, Sir William Lyons Rd, COVENTRY, United Kingdom, October 8, 2015
Understand how worthwhile it is to implement design
optimisation to overcome the increasing market
challenges. modeFRONTIER is used in various engineering
disciplines and for numerous applications, supporting
designers and engineers, operating in all industrial
sectors, to identify the best design solutions.
-
IWR-CIIT Joint Workshop on Numerical Solution of Partial Differential Equations (DUNE/PDELab)
Workshop, COMSATS Institute of Information Technology, Islamabad, Pakistan, October 5, 2015
The department of mathematics COMSATS Institute of
Information Technology Islamabad, Pakistan is organizing a
workshop on “Numerical solutions of partial differential
equation” jointly with the Interdisciplinary
Center for Scientific computing (IWR), University of
Heidelberg Germany on 5th-9th October 2015.
-
One Month Evening batch-Course on CFD (ANSYS FLUENT,CFX and ICEMCFD HEXA),From 5 th October 2015
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, October 5, 2015
Industry oriented course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.classes from 6.30 Pm to 9 PM.Monday to saturday
,most suited for working professionals and out
station students.
-
2015 CONVERGE User Conference
Conference, RCR HQ, Welcome, United States, October 5, 2015
The second annual CONVERGE User Conference will offer
two full
days of presentations (October 6-7), training, and
networking events.
Live music, delicious food, giveaways, and tours will make
for a great
time! Sponsorship opportunities are available for companies
that
would like to exhibit.
-
ERCOFTAC-CFD for Dispersed Multiphase Flows, 1-2 October 2015, Imperial College, London, UK
Course, Imperial College, London, United Kingdom, October 1, 2015
This course is rather unique as it is one of few in the
community that is specifically designed to deliver, a) a
best practice guidance and b) the latest trends, in CFD for
dispersed multi-phase flows.
The course appeals to researchers and engineers involved in
projects requiring CFD for (wall-bounded) turbulent
dispersed multiphase flows with bubbles, drops or particles.
Moreover, delegates are offered the opportunity to present
their work via 10 minute presentations.
-
Basic/Advance Training on CFD/FEM techniques for Industrial Applications
Course, Andhra Bank Building 3rd Floor, Hydernagar, Hyderabad, India, October 1, 2015
Virtual Product Developmment of Power/Process equipment
assemblies involves extensive design process with multi-
disciplinary aspects. Three dimensional Modelling, Meshing
and CFD and FEM Simulation towards fluid solid interaction
studies and its further influence on cavitation/erosion,
acoustics requires comprehensive skills for evaluating
product performance. It is expected that the proposed
course will help participants with necessary job skills for
building CAE Career.
-
Aero-Vibro-Acoustic simulation of Exhaust Systems and Mufflers
Online Event, September 30, 2015
Join NUMECA for a free webinar on FINE™/Acoustics
-
Live Webinar on Mircomixing
Online Event, September 24, 2015
[Free Webinar] - Do You Want To Improve Your Product Yields
and Selectivity? Register @ https://lnkd.in/etNbAx3
-
Reaction Engineering with Advanced Simulation
Online Event, September 24, 2015
In this webinar we continue to investigate the multiphase
flow phenomenon within reactors in more detail. For
example, in a trickle bed reactor the flow regime depends
on many complex factors, if not accounted for this can
lead to poor micro and macro distribution, resulting in
catalyst activity loss and failure to meet product
specifications.
-
The 10th International Symposium on Numerical Analysis of Fluid Flow and Heat Transfer - Numerical Fluids 2015
Conference, Rodos Palace Hotel, Rhodes, Greece, September 23, 2015
This is the 10th International Symposium on Numerical
Analysis of Fluid Flow and Heat Transfer - Numerical Fluids
2015. The focus of the symposium is numerical methods for
fluid flows and heat transfer, and related topics.
-
A Guide to Hybrid RANS-LES Methods: Industrial Examples and Theory
Seminar, Heythrop Park, Oxford, United Kingdom, September 23, 2015
This seminar will focus on these hybrid RANS-LES methods
and in particular what improvements they offer over pure
RANS and LES approaches. Through several presentations
from experts representing some of the key engineering
sectors (automotive, aerospace & turbo-machinery),
practical examples of these methods will be presented
offering attendees a chance to understand and question if
these methods could be applied to their simulations.
-
Full System Simulation of a Micro Gas Turbine
Online Event, September 22, 2015
This webinar focuses on how CFD/CHT simulation was used
to discover better designs faster, ultimately yielding a
highly reliable and cost-efficient micro turbine capable
of generating 3kW of power.
-
Sunday batch-Course on CFD (ANSYS FLUENT,CFX and ICEMCFD HEXA),From 20 th September 2015
Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, September 20, 2015
Week end batch course on CFD covering theory,ANSYS
FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA)
softwares.Class duration: Sunday 9 Am to 2 PM.
Ten sundays,most suited for working professionals and out
station students.
-
Expanding the Boundaries of Mutli-Disciplinary Analysis with Fluid Structure Interaction (FSI)
Online Event, September 17, 2015
This webinar will show you how simulation within a single
integrated user interface can be used to perform FSI
analysis using a range of different techniques including
the ground-breaking new finite element solver.
-
New First in Flutter Analysis for Multi-Row Turbomachinery with FINE™/Turbo v10.1
Online Event, September 16, 2015
Join NUMECA for a free webinar on September 16
-
How Simulation is Impacting Respiratory Systems within Life Sciences
Online Event, September 15, 2015
In this webinar we will discuss and demonstrate how
leading simulation software can be used to prototype
device designs, eliminating the need for time-consuming
clinical tests. Topics will include the modeling of the
device, in silico modeling of nasal passages and
respiratory tracts, diagnostics and even virtual
surgeries to aid the decision-making process.
-
Introduction to CFD Principles Training Course - Special Discounted Rate for September: £99
Course, Wilde Analysis Ltd, Brindley Lodge, Adcroft Street, Stockport, United Kingdom, September 15, 2015
This independent, software-neutral course will provide you
with a solid foundation for practical elements of
computational fluid dynamics – helping you to analyse your
own and 3rd party simulations effectively and accurately.
Wilde are offering a special discounted rate for this
course in September.
-
EUROGEN 2015 Conference
Conference, Technology Innovation Centre building, Glasgow, United Kingdom, September 14, 2015
The aim of the EUROGEN conference is to bring together
specialists from Universities, Research Institutions and
Industries developing or applying Evolutionary and
Deterministic Methods in optimization of design and
emphasizing on industrial and societal applications.
-
Flipping the Classroom: Strategies for Success in Engineering
Online Event, September 10, 2015
In this online event, Professor Ron Averill discusses
examples of the flipped model used at Michigan State
University and will explore different teaching
approaches. The advantages of lifelong learning and
relevant learning tools that can prepare engineers for
the transition to industry will be discussed. Engineering
professors, students and researchers can learn how and
why the use of this unique learning approach by a wide
range of industries continues to grow.
-
Multidisciplinary Earth Sciences Symposium (Prague, 2015)
Conference, Prague, Czech Republic, September 7, 2015
This symposium aims at presenting and discussing integrated
studies on the environment, particularly in the session
'Environmental impact on infrastructures'
-
Advanced Methods in Computational Fluid Dynamics
Course, School of MACE, The University of Manchester, Manchester, United Kingdom, September 7, 2015
The course consists of two parts: theoretical course on
advanced CFD approaches and tutorials with open-source
solver Code_Saturne. The main focus of the first part will
be on RANS models, LES and DNS for turbulent flows,
fluid-structure interaction methods, compressible flows and
aeroacoustics. The second part of the course will be held at
the Science & Technology Facilities Council (STFC) and is
devoted to learning the use of open-source CFD solver
Code_Saturne.
|
